Here’s a quick and easy way to charge your Canon camera battery without a charger. 1.Plug your camera into a power source, like a wall outlet. 2.Turn on your camera. 3.Press the shutter button halfway to wake up the camera’s internal sensor. 4.Wait until the camera displays a green light and then release the shutter button. I found a photo of a Canon PD-E1 charger. It says, “Output: 5.0V – 3.0A and 9.0V – 3.0A.” Volts x Amps = Watts, so we know that Canon’s charger can output both 15 Watts and 27 Watts. I don’t know yet if the R-series cameras charge at 5V, 9V, or both. But, since the battery is 7 Volts, my guess is the camera uses 9 Volts, 3 Amps. The camera does not turn on if the remaining battery power is low. In this case, charge the battery for more than 40 minutes before turning on the power. Charging time: Approx. 6 h 10 m (when charging at 25°C (77°F)) The battery cannot be charged outside the room temperature range of 10°C to 35°C (50°F to 95°F). Recharge the battery. Remove the discharged battery from the camera. Attach the battery securely to the charger. The design of battery chargers can be different. Flip out the prongs of the charger or attach the power cord and plug it into a power outlet. Recharging starts automatically and the charge lamp blinks in orange. No. 700D takes the LP-E8 battery, 1200D takes the LP-E10. My advice: go on Amazon and buy a third-party battery charger; something like this one, which handily comes with two extra battery packs. You can even charge both batteries at the same time, assuming you plug it into a USB wall charger (like for a phone) with 2.4A output. Since you need Step 1: Connecting the Charger Before charging your Canon digital camera, make sure you have the charger and the appropriate power cable. The charger usually comes with the camera, but if you don’t have one, you can purchase it from a Canon authorized dealer or online. Once you have the charger, find a power outlet nearby. Charge the camera. Charge the camera by connecting the camera’s Digital terminal to a power adapter (sold separately). After charging begins, the indicator lamp turns orange. The indicator lamp goes off after charging is finished. Charging the camera when it is fully depleted takes approx. 1 hr. and 50 min. at room temperature (23°C/73°F). Battery charger. Charging time. NB-6LH. CB-2LY / CB-2LYE. Approx. 2 hr. The charging lamp is turns orange during battery charging. When charging is finished, the lamp turns green. IMPORTANT. To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours. 1. Charging Your Canon Camera With A Wall Plug. Your Canon camera can also be charged via a wall connection. Use the wall plug to charge your camera if you have any USB-C, Type A to USB 2.0, Mini B, and 3.0 ports available. If you wish to employ this technique, kindly adhere to the guidelines below. PQE2c1k.

how to charge a canon camera